Próbáljon kulcsszavak, rendelési- vagy termékkód, vagy gyári szám szerint keresni, pl. „CM442” vagy „Műszaki információk”
A keresés elindításához írjon be legalább 2 karaktert.
  • Előzmények
product picture of the particle measuring device FWE200DH

FWE200DH
particle measuring device

Reliable dust measurement in wet gases

IDFW200
Please Wait (spinning wheel)
Ár feltöltés alatt
Az árak ideiglenesen nem érhetők el
Price on request
Mérési feladat/Alkalmazás szűrése
Mérési feladat / Alkalmazás

Konfigurálja a termék CAD-rajzainak letöltéséhez

  • Mérési elv

    Scattered light forward

  • Measured variables

    Scattered light intensity, dust concentration (after gravimetric comparison measurement)

  • Performance-tested measurands

    Dust concentration

  • Certified measuring range

    Dust concentration: 0 ... 7.5 mg/m³ / 0 ... 10 mg/m³ / 0 ... 15 mg/m³ / 0 ... 50 mg/m³ / 0 ... 100 mg/m³ / 0 ... 200 mg/m³ / 0 ... 500 mg/m³

  • Process temperature

    PVDF gas removal probe: ≤ +120 °C
    Hastelloy gas removal probe: ≤ +220 °C
    Versions for higher temperatures on request

  • Process pressure

    With SLV7 2BH1100 purge air unit:
    –20 hPa ... 20 hPa
    Other pressure ranges on request

  • Ambient temperature range

    –20 °C ... +50 °C
    Intake temperatures for purge air: –20 °C ... +45 °C

  • Process gas humidity

    Max. 40 g/m³ liquid water without water vapour

  • Degree of protection

    Measuring and control unit: IP54
    Electronics enclosure: IP65

  • Conformities

    Approved for plants requiring approval
    2001/80/EC (13. BImSchV)
    2000/76/EC (17. BImSchV)
    27. BImSchV
    TA-Luft (Prevention of Air Pollution)
    EN 15267
    EN 14181
    U.S. EPA PS-11 compliant
    When options are used, agreement with local authorities may be required

  • Product safety

    CE